Mixing method of enamel reactor

The enamel reactor is mainly used as a device for mixing materials when it is used. It can be used in many industries when it is used. The requirements for materials are relatively low when it is used, and the price is very beautiful when it is purchased. Let's take a detailed look at the methods used in mixing.

1. First, in the process of dropping and heat preservation, it is necessary to regularly check whether the temperature and pressure inside the equipment are normal, and regularly check whether the materials involved in the reaction inside the equipment are normal and record the situation. When the temperature and pressure or materials are abnormal, corresponding measures must be taken, Restore it to a relatively normal condition to avoid some dangers in the enamel reactor.

2. In addition, when taking materials from the equipment, the mixing must be stopped for more than two minutes to ensure that the mixing can continue only after the sampling is completed, and some containers that are easy to drop or hard metal type can not be used for operation when taking medicine, so as to avoid damage to the enamel surface during sampling.

3. In addition, when putting materials into the equipment, the valve must be readjusted to a proper position. When the mixing work is started, the inspection frequency can be more frequent. If there is some vibration or obvious noise in the process, the operation must be stopped in time. Sometimes, some materials are solid powder, Then it can be stirred only after it is dissolved.

The above is the method used by the enamel reactor during mixing. Now, when mixing, it is necessary to conduct various inspections on the equipment to ensure that the subsequent work can be carried out normally. At the same time, it is also necessary to clean up and regularly inspect the equipment after use.