Welcome to Tanglian Heavy Industry Group Co., Ltd.

Language
 الفولاذ المقاوم للصدأ خزان 

Stainless steel storage tank

Stainless steel storage tank
Stainless steel storage tank

Stainless steel storage tank is an indispensable anti-corrosion equipment in the chemical industry. In use, factors such as mechanical collision and sudden temperature change often cause porcelain peeling, cracks, bubbles, pores and other damages of surface glaze. These defects are never allowed in enamel equipment. Once this phenomenon occurs, it must be repaired. The on-site repair agent of polymer composite material is a two-component composite material with polymer, alloy steel powder or wear-resistant ceramic powder as the substrate and curing agent. Compared with ordinary resin repair agents, polymer composites rely on their own finer polymer structure, which makes the materials have stronger adhesive force and excellent corrosion resistance and corrosion resistance. Polymers can even penetrate into the metal to form a tighter polymer composite protective layer.

When maintaining the stainless steel storage tank, always pay attention to the working condition of the whole equipment and reducer. If the reducer is insufficient, it should be supplemented immediately. The electric heating medium oil should be replaced every half a year. The safety valves, pressure gauges, distillation holes, electric heating rods, electrical instruments and meters on the jacket and pot cover should be checked regularly. If there is any fault, it should be replaced or repaired immediately. When the equipment is not in use, it must be completely cleaned on the inner and outer walls of the container with warm water, Often scrub the pot body to keep the appearance clean and the inner tank bright, so as to achieve the purpose of durability.

Repair and maintenance of stainless steel vertical storage tank: when using stainless steel reactor, the refrigerant inlet valve must be closed, the remaining refrigerant in the boiler and jacket must be drained, and then the materials shall be input, the agitator shall be started, and then the steam valve and electric power supply shall be opened. After reaching the required temperature, the steam valve and electric power supply shall be closed first, and then the agitator shall be closed after 2 ~ 3 minutes. After processing, the remaining condensate in the boiler and jacket shall be drained, Wash with warm water as soon as possible, brush off the sticky materials, and then wash the inner wall of the container with 40 ℃ ~ 50 ℃ alkaline water, and wash with clean water. Especially when there is no material (heat absorbing medium) in the stainless steel reactor pot, do not open the steam valve and electric power supply. Pay special attention to the use of steam pressure, which shall not exceed the rated working pressure.

Repair process: surface cleaning → rust removal → absolute alcohol cleaning → coating bottom layer repair agent → coating surface layer repair agent → curing → use.