Glass lined reactor manufacturer | Zibo Tanglian

Home > News > Enterprise News

Operating temperature of enamel reactor

The enamel reactor has temperature requirements during its operation. If the temperature is denatured, it may have a bad influence on the equipment. During its operation, it is necessary to understand the temperature and control the temperature denaturation to ensure that the enamel reactor can operate normally without abnormal problems. The following describes the operating temperature of this type of equipment.

 

First of all, when the enamel reactor is ready for heating and cooling, its internal environment is special, especially in a high-pressure environment, its temperature itself changes, so whether it is large or not Temperature denaturation should be carried out slowly during the initial use, and no major changes should be made, which ensures that the entire reaction process is orderly.

 

Secondly, the operation temperature of the enamel reactor should be clear. There is also a slight difference between the different reactors. The common equipment reaction temperature is 0-200 °C. This is the case for most of the reactor temperature specifications.

 

In addition, we should understand the temperature and temperature change of the enamel reactor. After understanding this, we can know the specific situation of the enamel reactor equipment. At present, it is maintained at 200 °C. This situation also depends on the products produced by different manufacturers. The gap between equipment and equipment is relatively large, and the production standards between manufacturers and manufacturers are also different. These technical parameters can be known to the manufacturer in advance.

Electrical Heating Type Pilot Glass-Lined Reactor.jpg


TAG:    enamel reactor operating temperature of equipment
Copyright © 2018 Chinareactor.com Inc. All Rights Reserved.
stainless steel reactor,glass lined storage tank,heat exchanger,GMP glass lined reactor,AE|BE|CE|glass lined reactor